When people ask how much does Starlink installation cost in Ontario, the final bill comes down to two separate expenses: the fixed price of the Starlink equipment kit, and the variable labour cost to mount the dish and run the cabling.
The kit price is set by SpaceX and doesn’t shift from one part of Ontario to the next. Labour is where the number actually moves. Our professional installs typically run $550 to $1,000, depending on the roof design and how hard the job is to reach and seal properly.
| Cost Category | What It Includes | Price Variability |
| Equipment Kit | The Starlink dish, router, cables, and basic kickstand base. | Fixed. Priced uniformly by SpaceX, whatever region of Ontario you’re in. |
| Professional Labour | Roof or wall mounting, sealing penetrations, grounding, and routing cable through the building. | Variable. Depends heavily on roof access, mount type, and cable run distance. |
One thing worth knowing before you budget: the hardware has to be ordered directly from Starlink. We install and configure the kit, but we don’t sell it and we’re not an official Starlink representative, so warranty claims go through them.
What Drives the Labour Cost
If you’re hiring a technician in Ontario, these four variables decide whether your quote lands at the low or high end of that range:
- Mount type. A straightforward pole mount on an accessible, low-pitch roof is far cheaper than a heavy chimney mount, a non-penetrating weighted roof mount, or a poured concrete pad for a ground pole. We’ve written more on how each mounting method holds up in Canada if you’re weighing the options.
- Cable run length. Dropping a cable from the roof straight into a second-storey router is quick. Pulling it through an attic, down two floors, or fishing it behind finished basement drywall takes real time, and it’s the same skill set as the network cabling work we do across Ontario.
- Roof pitch and access. Tall buildings, steep pitches, and roofs that call for scaffolding or fall-arrest gear all add hours to the job.
- Obstruction assessments. Starlink needs a clear view of the northern sky. If trees or a neighbouring building are in the way, we may need a taller mast or a different mount location entirely, which adds both material and labour.
DIY vs. Professional Installation
SpaceX built the kit to be DIY-friendly, and for some setups that’s genuinely all you need. If the dish is going on a deck, a lawn, or a patio using the included kickstand, you can be online in minutes with no installation cost at all. Our walkthrough of what a kickstand setup actually involves covers that route.
Roof mounts are a different story. A permanent mount means drilling into your roof, and a penetration that isn’t sealed properly will leak. Not immediately, usually. It shows up as a stain on a ceiling eight months later, and by then the repair costs more than the install did. That’s the main reason people book professional Starlink installation across Ontario rather than climbing up themselves: the mount gets sealed, grounded, and positioned for a clear sightline the first time.
Every property is different, so the only way to get an accurate number for your Starlink installation cost in Ontario is to have someone look at your roofline and your router location in person. Book a free site assessment and we’ll give you a firm quote before any work starts.
If you’d like to see how these installs have gone for other Ontario properties, our Google reviews are a good place to start.
